Barco S3 series, User Manual

Page: 153 / 538

6. EM GUI orientation
6.18 Programming Menu
General
The programming page is where the event is set up and everything comes together. Users can de fi ne sources from inputs, assign
layers and backgrounds into screens and create User keys and presets and more. Once programmed and de fi ned this is where the
show is played back as well.
Description
Image 6-38
Programming Menu Overview
1 Resources area This area contains the available resources for
programming and playback, as inputs and sources. Also
in this area the still store (logo) images are shown.
2
Workspace / Programming Diagram area
For each destination or destination group the Program and
Preview screens can be viewed individually by selecting
the corresponding tab. All Program and Previews screens
can be viewed simultaneously by selecting the “View All”
button.
The space between Program and Preview has Layouts, a
function where a certain group of destinations can be laid
out in the workspace
3 Workspace / System wide function Layer Alignment adjustments and controls to manage the
Preview/Program screens.
4 Adjustment area The menus in this area provide control of parameters
for selected layer and source. These can be modi
fi ed
and managed. This is where creation of User Keys and
presets is done
The following sections describe each part of the Programming page in detail:
• "Programming Menu > Resources area", page 150
• "Programming Menu > Diagram area", page 163
• "Programming Menu > Layer Modi fi er area", page 166
• "Programming Menu > Adjustment area", page 170
R5905948 EVENT MASTER DEVICES 17/07/2017 149