![background image](http://html1.mh-extra.com/html/bandelin/trison-4000/trison-4000_operating-instructions-manual_470809070.webp)
70 / 86
6416h GB/2021-01
1
electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • [email protected]
6.4.2
Certi
fi
cate of Decontamination
If the ultrasonic bath is sent back to the manufacturer for repairs (with accessories, if
applicable), the form "Certi
fi
cate of Decontamination" must be
fi
lled out and a
ffi
xed to
the packaging in a visible spot on the outside.
If this form has not been
fi
lled out, we reserve the right to refuse receipt of the package
in order to protect our employees.
The form can be downloaded as a PDF
fi
le from our website:
www.bandelin.com/Downloads ...
6.4.3
Replacing fuses
Two fuses are built into the TRISON ultrasonic baths, which respond to defects or
overload. If a fuse has blown, the ultrasonic bath will no longer function (touchscreen
remains dark). In general, the bath will be defective and must be sent to the
manufacturer/customer service for repair.
Caution!
• Only authorised skilled personnel may replace the
fuses.
• Pull the mains plug before replacement.
• The fuse values are listed under "Technical Data"
(Section 1.8).
6.4.4 Determining the software version
In some cases it may be necessary to inform authorised skilled personnel or the
manufacturer of the software version and other system data.
Determining the software version
The software version can be found, if required, under
Settings/System/Information
.
Fuses
Note:
The blank
fi
elds here are
fi
lled out by
the software and only appear when
the unit is functional.