manualshive.com logo in svg

BANDELIN Trison 4000, Operating Instructions Manual

Share
Download
BANDELIN Trison 4000 Operating Instructions Manual Download Page 63

6416h GB/2021-01

63 / 86

1

 electronic GmbH & Co. KG  •  Heinrichstraße 3-4  •  12207 Berlin  •  Deutschland  •  [email protected]

6.1.1  

Replacing 

fi

 lter cartridge  

During post-processing and in the event of a prematurely clogged 

fi

 lter, a prompt to 

replace the 

fi

 lter will appear on the touchscreen. 

In the event of a persistent error message, the 

fi

 lter cartridge can be replaced – the 

pump will stop during this error message. 
After replacement, the error message must be acknowledged. 

The 

fi

 lter cartridges are suitable for backwashing. The 

fi

 lter cartridges can be used 

multiple times with appropriate, thorough backwashing.

Removing the 

fi

 lter cartridge:

  Unscrew the lower 

fi

 lter housing (transparent).

  Pull out the 

fi

 lter cartridge from the head piece.

  Thoroughly rinse the lower 

fi

 lter housing with 

water.

Inserting a new 

fi

 lter cartridge:

  Insert open side (straight) of the 

fi

 lter cartridge into the 

head piece.

  Check if the sealing ring is in place.

  Re-screw the lower 

fi

 lter housing.

Head piece

 

Filter cartridge

Sealing ring

Lower 

fi

 lter housing

Summary of Contents for Trison 4000























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands