![background image](http://html1.mh-extra.com/html/bandelin/trison-4000/trison-4000_operating-instructions-manual_470809053.webp)
6416h GB/2021-01
53 / 86
1
electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • [email protected]
Filling
To prepare the ready-for-use solution, you may only use water that is microbiologically
at least of drinking quality.
For an optimal ultrasound e
ff
ect, the
fi
lling temperature of the water should be between
18 and 25°C. In addition, a suitable disinfection and/or cleaning agent should be added
to the water in the ultrasonic oscillating tank, see Section 7.3.
Important!
• Verify that the outlet is closed.
• Do not
fi
ll oscillating tank with hot water (> 40°C). The
fi
lling temperature should be
between 18 and 25°C.
• Fully replace used liquids, do not refresh them by adding more liquids. Follow the
manufacturer's dosing instructions.
• Distilled or deionised water without additives is unsuitable for cleaning directly in the
ultrasonic oscillating tank.
• Do not use any combustible liquids (e.g. benzene, solvents) or chemicals that
contain chloride ions or that separate (some disinfectants, household cleaners, and
dish detergents), for sonication in the stainless steel tank.
• Compatibility between the instrument and the agent is to be veri
fi
ed using the
respective manufacturer's speci
fi
cations.
• Working with chemically aggressive agents is strictly prohibited!
Degassing
Degassing the bath liquid increases the ultrasound e
ff
ect.
Freshly-
fi
lled
fl
uid or
fl
uid that has remained in the ultrasonic oscillating tank for a
longer period of time must be degassed prior to use. Gases released in the liquid
(e.g. oxygen) are reduced through degassing, thus signi
fi
cantly improving the
ultrasound e
ff
ect.
The cavitation noise changes during the degassing process. Loud degassing noises
disappear toward the end of the degassing process and the ultrasonic bath appears to
work more quietly.
However, a lower noise level does not mean a reduction in ultrasonic power. Instead, it
signi
fi
es the end of the degassing process and an improvement in the ultrasound e
ff
ect.