![background image](http://html1.mh-extra.com/html/bandelin/trison-4000/trison-4000_operating-instructions-manual_470809061.webp)
6416h GB/2021-01
61 / 86
1
electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • [email protected]
TRISON Lift, TRISON Twist and TRISON Rack
• Remove and clean the TRISON Lift regularly (or disinfect it as well); for this purpose,
it can be placed in the ultrasonic bath, e.g. during post-processing of the ultrasonic
bath, see Section 4.3. Next, rinse thoroughly with water, wipe dry with a soft towel
and attach once again to the work plate.
• Special accessories such as the TRISON Twist, TRISON Rack and temperature
sensor should also be cleaned (or disinfected) during post-processing of the
ultrasonic bath, see Section 4.3.
Important:
The plug on the TRISON Twist or temperature sensor must not be submerged!
If the plugs come into contact with liquids, they must be blown out with compressed
air and allowed to dry completely.
5.2 Disinfection
• If contaminated medical instruments are treated in the ultrasonic bath, hygienic
safety after application is important. An automatic procedure for chemical disinfection
of the ultrasonic bath and accessories (TRISON Twist, TRISON Rack, TRISON Lift)
must therefore be conducted, if required, as part of the post-processing, see Section
4.3. Thermal disinfection or sterilisation of the device components is not permitted,
see also Section 1.8.
• In order to prevent any cross-contamination as a result of the colonisation of
microorganisms, especially along the tank edge and in the drain outlet area, but also
on the operator panel, these areas are to be regularly cleaned and disinfected with
a suitable surface disinfectant, i.e. one that is at least bactericidal, yeasticidal and
partially virucidal.
5.3 Warehousing/storage
If not in use for long periods of time, the TRISON ultrasonic bath should be
disconnected from the mains (pull the mains plug of the mains supply switch from the
power outlet).
The lid should be put on in order to protect the ultrasonic oscillating tank from outside
contamination.