manualshive.com logo in svg

BANDELIN Trison 4000, Operating Instructions Manual

Share
Download
BANDELIN Trison 4000 Operating Instructions Manual Download Page 33

6416h GB/2021-01

33 / 86

1

 electronic GmbH & Co. KG  •  Heinrichstraße 3-4  •  12207 Berlin  •  Deutschland  •  [email protected]

Setup of operating screens: 

Brief instructions or information on 
the action to be carried out

Illustration of the action

Navigation bar

•  The Next key   is used to proceed only when all instructions have been followed.
•  The Back key   is used to return to the previous screen.
•  The Home key   takes you back to the Home menu.

Setup of process screens: 

If a process has started, a progress bar will appear to show the status of the process. 
A Cancel key is displayed in the navigation bar in place of the Home button and makes 
premature termination of the ongoing process possible if required (not recommended).

Progress bars

Various process indica-
tors, e.g. number of the 
currently rinsed channel, 

fl

 ow-through rate, tempera-

ture ok or not ok

Cancel key

Summary of Contents for Trison 4000























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands