![background image](http://html1.mh-extra.com/html/bandelin/trison-4000/trison-4000_operating-instructions-manual_470809067.webp)
6416h GB/2021-01
67 / 86
1
electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • [email protected]
Error
Possible cause(s)
Measure(s)
Touchscreen does not
react to pressing of
keys
Keys not pressed correctly?
Control option: An acoustic signal is
emitted.
Touchscreen defective?
Can only be recti
fi
ed by the manufacturer.
TRISON Base freezes
on the welcome
screen?
Has it been turned on and o
ff
too quickly?
No error. The start screen appears for
approx. 10 sec.
Turn o
ff
the ultrasonic bath and turn it back
on after 10 sec.
Ethernet cable not plugged in? No error. The ultrasonic bath restarts after
approx. 10 sec.
SD card defective?
Can only be recti
fi
ed by the manufacturer.
Progress bars freeze?
Software or hardware
defective?
Turn o
ff
the base and turn it back on after
10 sec.
Can only be recti
fi
ed by the manufacturer.
Repeats negative
process result on
the same channel
(example 5)
without a plausible
cause being
recognisable
Are instruments in this
channel not covered with
liquid?
If needed,
fi
ll with liquid up to the
fi
lling level
mark.
Adapter or coupling incorrectly
connected/mounted?
Check the plug connection of the adapter
and coupling. If needed, disconnect and
reconnect, see Section 3.3
Clogging in the hose system
of the TRISON Base?
Interchange the instruments.
If a di
ff
erent channel is now a
ff
ected, the
instrument itself is not continuous.
Use a new hose set.
Can only be recti
fi
ed by the manufacturer.
Repeated negative
process result on all
channels
Are instruments not covered
with liquid?
If needed,
fi
ll with liquid up to the
fi
lling level
mark.
TRISON Rack: Adapter
incorrectly connected/
mounted?
Check adapters and adapter connections,
see Section 6.1.2.
Blockage/defect in the
TRISON Base rinsing circuit?
Can only be recti
fi
ed by the manufacturer.
Ultrasonic bath
oscillates weakly,
unevenly or noise is too
loud
Overloaded with objects to be
cleaned (instruments)?
Remove a few parts.
Irregular sounds?
No error.
Defective oscillating system or
ultrasound generator?
Conduct a foil test and compare it to the
fi
rst
test (conducted during commissioning).
Request a test sheet and allow authorised,
skilled personnel to conduct test. If an error
is detected, the ultrasonic oscillating tank
should be returned to the manufacturer for
repair.