![background image](http://html1.mh-extra.com/html/bandelin/trison-4000/trison-4000_operating-instructions-manual_470809038.webp)
38 / 86
6416h GB/2021-01
1
electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • [email protected]
3.3.1.1 Connection of Si instruments to the TRISON Twist TT 4000 Si
Hold the TRISON Twist by the handle and rotate it
into the top position.
If necessary, open the push handles, place the
robotic instruments in the TRISON Twist mounts
and ...
... secure them once again with the push handles.
This will hold the instruments in place and prevent
them from
fl
oating to the surface.
Only when cleaning a Si Stapler:
Observe the note for Luer plugs – see next page.
Connect the rinsing plugs to the robotic
instruments and press
fi
rmly.
Hold the TRISON Twist by the handle and lower
it into the ultrasonic bath (lower position, see
images below).
Connect the couplings to the TRISON Base
(see Section 3.3.3).
Removal of the instruments:
Follow the reverse order.
After cleaning a Si Stapler: Unplug the individual Luer connector and replace with the
original rinsing plug.
TRISON Twist Si positions:
Top position
(assembly, rinsing plug con-
nection)
Bottom position
(sonication)