![background image](http://html1.mh-extra.com/html/bandelin/trison-4000/trison-4000_operating-instructions-manual_470809051.webp)
6416h GB/2021-01
51 / 86
1
electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • [email protected]
3.9
Connecting/analysing the temperature sensor
The TM 4000 temperature sensor must be connected
to the TRISON Base in order to operate; see Section
3.3.3.
The sensor immersion sleeve must be fastened to
a front basket mount of the oscillating tank with the
clamp.
Important:
• Functioning is only guaranteed if the plug is connected and
the immersion sleeve for the sensor has been immersed.
• The plug on the temperature sensor must not be
submerged!
If the plug comes into contact with liquids
it must be blown out with compressed air
and allowed to dry completely.
Assessment
The LED display of the temperature sensor should be positioned
clearly visible next to the TRISON Base, as this is used for
evaluation by optical signals.
• Green – permanently lit:
Ready for operation, temperature OK
• Red – permanently lit:
Ready for operation, bath temperature too low
• No display:
Internal error (e.g. sensor defective)
• Red –
fl
ashing:
Ready for operation, bath temperature too high
• Orange –
fl
ashing:
Sensor not immersed
Note:
The temperature sensor is only used/evaluated with the “Standard” program.
With the two other programs, the temperature is monitored by the internal temperature
sensor and displayed by the TRISON Base.