![background image](http://html1.mh-extra.com/html/bandelin/trison-4000/trison-4000_operating-instructions-manual_470809044.webp)
44 / 86
6416h GB/2021-01
1
electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • [email protected]
3.3.3
Establishing connections to the TRISON Base
Connect couplings
For a rinsing operation, the special baskets must be connected with the TRISON Base.
Always connect both couplings of the hose sets by pressing
down the release button on the couplings and attaching the
coupling until it engages.
Note:
The couplings are coded (“A” or “B”) and therefore cannot be
confused.
Important:
Before starting with the cleaning process, both “RL” returns
(one per coupling) must be placed loosely in the oscillating tank.
This will pump the rinsing
fl
uid back into the ultrasonic oscillating
tank in a circuit.
Connect TRISON Twist or temperature sensor
The connection between TRISON Twist/temperature sensor and
TRISON Base is established via a push-pull circular plug with locking
mechanism.
To connect, hold the plug from the handle and position it in such a
way that the guide lug and arrow point upwards.
The plug can only be connected if the socket's guide lug and the
plug's guide lug are positioned uniformly on the TRISON Base, see
image. Insert the plug into the socket until it clicks into place.
In order to unplug the connection, hold the plug from the handle only
and not from the cable, pull it back and remove the plug.
Socket on the
TRISON Base
Guide groove
Plug on TRISON Twist/
temperature sensor
Guide lug
Handle with
arrow marking
Caution:
• Do not twist the plug or insert it forcefully. Damage may lead to a short circuit!
• The plug is not waterproof.
A B