![background image](http://html1.mh-extra.com/html/bandelin/trison-4000/trison-4000_operating-instructions-manual_470809042.webp)
42 / 86
6416h GB/2021-01
1
electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • [email protected]
3.3.2
Rinsable MIS instruments
Rinsable MIS instruments are connected to the TRISON Rack. To do so, use the hose
set with the adapters, see Section 1.3.3.
Setup of an adapter:
Inspection glass
Clamp washer
Adapter seal
Rotating ring
Markings
Fastening ring
Nozzle for hose
connection
Adapter settings:
open
half-open
closed
Connecting the instruments:
Check whether the adapter is fully opened.
Slide the closed instrument all the way into the adapter, in the direction of the arrow,
until the movable part on the tip of the instrument is fully visible in the inspection glass.
Do not damage the adapter sealing
, e.g. by inserting the instrument in a crooked
manner.
Close the adapter. To do so, turn the rotation ring in a clockwise direction until it
clicks (tensioning of the adapter seal). After it
clicks 3×
(clicking noise), it is certain
that the adapter sealing has been correctly sealed.
3×
Important!
Click a maximum of 4 × (the markings will then align once again); additional
clicking could cause damage to the adapter sealing.