![background image](http://html1.mh-extra.com/html/bandelin/trison-4000/trison-4000_operating-instructions-manual_470809049.webp)
6416h GB/2021-01
49 / 86
1
electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • [email protected]
3.8.2 Copying/retrieving protocols via USB interface
The saved protocols may be retrieved, when required, by going to
Settings/User/
Documentation
.
The number of saved protocols is displayed on the upper left-hand corner.
After inserting the USB stick, the detected hardware appears in a
fi
eld in the upper
right. Press the “USB” key on the bottom right in order to copy the protocols onto the
USB stick.
Quantity
Status
display
USB key: Start protocol transfer
(will only proceed if a USB stick
has been plugged in and is
detected)
Delete all protocols
Important:
• After copying, the data is automatically deleted from the internal memory.
• Always close the interface cover(s) after use.
3.8.3 Copying/retrieving protocols via Ethernet interface
The IP address that is assigned by the DHCP server can be found, if required, under
Settings/System/Information
.
The IP address is only available when the Ethernet connection is established.
For this to happen, the corresponding cable must be plugged in before the TRISON
Base is turned on, see Section 1.1 if needed.
If a connection is not established, the message "not available"
will appear.