manualshive.com logo in svg

BANDELIN Trison 4000, Operating Instructions Manual

Share
Download
BANDELIN Trison 4000 Operating Instructions Manual Download Page 77

9  

Decommissioning  

The device must be disposed of properly – not in household waste. 

Disposal must be conducted in accordance with the Waste, Electrical and 
Electronic Equipment Directive 2012/19/EU. 
Any supplementary/di

ff

 erent national regulations must be observed.

•  The device must be decontaminated before disposal. It can then be disposed of as 

electronic waste. If decontamination is incomplete/cannot be correctly performed, a 
material safety data sheet noting the liquids used must be a

ffi

  xed to each device. 

•  Metal accessories such as the lid or basket should be decontaminated and disposed 

of as metal waste. 

•  Plastic accessories such as insert baskets, silicone knob mats or lids must be 

decontaminated and disposed of.

•  The packaging is recyclable. 
•  The TRISON Base contains a battery that should be appropriately disposed of.

Environmentally-appropriate disposal of the battery

The battery contained in the TRISON Base control unit must be professionally removed 
as described below. It must be disposed of in discharged condition, at waste battery 
collecting station. 

Caution!

•  Only authorised skilled personnel may remove the battery!
•  Pull the mains plug before removal!

Removal instructions:

  Disconnect any connections from the TRISON Base control unit to the TRISON 

mains supply switch and to the compressed air supply. If needed, dismount the 
control unit from the work plate. See the installation instructions for additional 
information.

  Remove the screws alongside the plastic cover. Then pull the cover carefully 

upwards/forwards, and loosen the connectors between the cover and subshell.

  The battery is located on the circuit board, on the inner side of the plastic cover.

10 Keyword 

index 

– not applicable –

  

BANDELIN electronic GmbH & Co. KG

Heinrichstrasse 3-4  
12207 Berlin
Germany

www.bandelin.com
[email protected]

  +49 (0)30 7688 00  

  +49 (0)30 7734 699

Certi

fi

 ed in accor-

dance with
ISO 9001  
ISO 13485

Summary of Contents for Trison 4000























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands