Bandai Namco DARK ESCAPE 4D, Operation Manual

Page: 71 / 209

69
8A. Installation and Assembly
- Must be performed by a technician -
Installation and
Assembly/T
echnician’
s Manual
Test Mode
Troubleshooting
While being careful not to pinch the harnesses and connectors, join the front assembly and center
assembly, and secure the assemblies to each other with two square washers (large) and two Phillips
hexagon socket head bolts (with flat and spring washers) (M6 x 40) on each side (total four washers
and four bolts).
When securing the assemblies, align the outsides of the front assembly and center assembly in the
lateral direction, and the top panel heights in the longitudinal direction.
If the top panel heights do not match, adjust the level adjusters.
(See “8A-4-9 Level Adjuster Adjustment” on page 90.)
Lead out the harness from the center assembly, and connect the two L side connectors.
Lead out the harness from the center assembly, and connect the two R side connectors.
Center assembly
Front assembly
Connectors (2)
Connectors (2)
Phillips hexagon socket head bolt (with flat and spring washers)
(M6 x 40)
Phillips hexagon socket head bolt (with flat and spring washers)
(M6 x 40)
Square washer (large)
Square washer (large)