2
1. Safety Precautions -Be sure to read to ensure safe operation-
1-3 Critical Safety Precautions
Should an abnormality occur, turn off the power switch immediately to stop operations. Then,
be sure to disconnect the power cord plug from the outlet. Operating the machine while the
abnormality persists may result in a or accident.
Sections of the monitor remain at a high temperature and high voltage even after the power
switch is turned off. To avoid electric shock or burns, be careful not to accidentally touch these
sections.
Dust accumulating on the power cord plug may result in a
Inspect the plug regularly and
remove any dust.
Fully insert the power cord plug into the outlet. Poor contact may generate heat and result in a
or burns.
Damage to the power cord may result in a
electric shock or electrical leakage. Be sure to
observe the following.
•
Keep the power cord away from heaters.
•
Do not twist the power cord.
•
Do not forcibly bend the power cord.
•
Do not alter the power cord.
•
Do not bundle the power cord.
•
Do not pull the power cord.
(Always unplug by holding the plug and not the power cord.)
•
Do not place objects on the power cord.
•
Do not allow the power cord to be caught between the machine and other devices or the
wall.
•
Do not do anything else that might damage the power cord.
Do not expose the power cord and power cord plug to water. It may result in electric shock or
electrical leakage.
Do not touch the power cord plug with wet hands. It may result in electric shock.
The machine is compatible with different power supplies; 3.2 A for AC 110 V, 1.8 A for AC 230 V
and so on. To prevent and electric shock, use indoor wiring that conforms to these power
supply
Use the power supply voltage that falls ±10% of the default voltage. Using a voltage outside
this range may result in a or electric shock. However, to ensure that the machine operates
in the optimum condition, keep the default voltage as much as possible.
Use the consumables and service parts (including screws) that are
by NAMCO BANDAI
Games Inc. To order parts, contact your distributor.
Do not modify the machine without permission. Do not perform any operations that are not
described in this Operation Manual. Modifying the machine may create unforeseen hazards.
When transporting and installing the machine in a different location, be sure to keep this Operation
Manual together with the machine.
Summary of Contents for DARK ESCAPE 4D
