Bandai Namco DARK ESCAPE 4D Page 132 Operation Manual Download

Page: 132 / 209

130

8B. Service

- Must be performed by a technician -

Remove the LED lamp from the illuminated switch, and replace the LED lamp.

* The LED lamp has plus and minus marks. When replacing, be careful to align the LED lamp correctly.

LED lamp

Illuminated switch

“+” mark

When replacing the illuminated switch, disconnect the four Faston terminals, and replace the illuminated

switch.

To install, perform the procedure in reverse.



After replacement, be sure to check operation in Test mode. (See “7-7-4(a) SWITCH TEST” on page

46 and “7-7-4(b) OUTPUT TEST” on page 47.)

Summary of Contents for DARK ESCAPE 4D


















































































































































































































Search results

Summary of Contents for DARK ESCAPE 4D

Reviews:

Related manuals for DARK ESCAPE 4D

Brands by name

Popular brands

Bandai Namco DARK ESCAPE 4D, Operation Manual

Search results

Summary of Contents for DARK ESCAPE 4D

Reviews:

Related manuals for DARK ESCAPE 4D

Brands by name

Popular brands