Bandai Namco DARK ESCAPE 4D Operation Manual Download

Page: 151 / 209

149

8B. Service

- Must be performed by a technician -

Service/T

echnician’

s Manual

Test Mode

Troubleshooting

Remove the 18 countersunk washer nuts (M5), and remove the seat support angles (A) and (B) and

the seat motor bracket.

Back side

Countersunk washer nut (M5)

Seat support angle

(A)

Seat motor bracket

Seat support angle (B)

Replace the rear seat cushion, and install by reversing the procedure.



When installing, be careful not to mistake the front and back of the rear seat cushion. The direction

with cushion attached to the side surface is the back.

Summary of Contents for DARK ESCAPE 4D


















































































































































































































Search results

Summary of Contents for DARK ESCAPE 4D

Reviews:

Related manuals for DARK ESCAPE 4D

Brands by name

Popular brands

Bandai Namco DARK ESCAPE 4D, Operation Manual

Search results

Summary of Contents for DARK ESCAPE 4D

Reviews:

Related manuals for DARK ESCAPE 4D

Brands by name

Popular brands