Bandai Namco DARK ESCAPE 4D Operation Manual Download

Page: 146 / 209

144

8B. Service

- Must be performed by a technician -

Remove the seven Torx bolts (M5 x 8), and remove the support bracket from the seat assembly.

Support bracket

Seat assembly

Torx bolt

(M5 x 8)

Seat guard tarpaulin

Lift up the seat guard tarpaulin, and remove the four Phillips hexagon socket head bolts (with flat and

spring washers) (M6 x 25) from inside the seat assembly.

Pull the seat assembly slightly forward and then lift it up and remove it.

Seat guard tarpaulin

Seat assembly

Phillips hexagon socket

head bolt

(with flat and spring

washers)

(M6 x 25)

Phillips hexagon socket head bolt

(with flat and spring washers)

(M6 x 25)

Summary of Contents for DARK ESCAPE 4D


















































































































































































































Search results

Summary of Contents for DARK ESCAPE 4D

Reviews:

Related manuals for DARK ESCAPE 4D

Brands by name

Popular brands

Bandai Namco DARK ESCAPE 4D, Operation Manual

Search results

Summary of Contents for DARK ESCAPE 4D

Reviews:

Related manuals for DARK ESCAPE 4D

Brands by name

Popular brands