Bandai Namco DARK ESCAPE 4D, Operation Manual

Page: 77 / 209

75
8A. Installation and Assembly
- Must be performed by a technician -
Installation and
Assembly/T
echnician’
s Manual
Test Mode
Troubleshooting
Secure the side wall L to the front assembly and center assembly with six flat washers (ø6.5 x 22 x
t1.6) and six button head bolts (M6 x 30).
Perform the same procedure to install the side wall R to the R side.
Flat washer (ø6.5 x 22 x t1.6)
Button head bolt (M6 x 30)
Side wall L
Button head bolt (M6 x 30)
Flat washer (ø6.5 x 22 x t1.6)
Place the roof reinforcement on top of the side wall L and side wall R, and secure it with four Torx bolts
(M5 x 8). At this time, install the roof reinforcement so that the LED module is toward the front.
LED module
Torx bolt (M5 x 8)
Roof reinforcement
Front
Torx bolt (M5×8)