Bandai Namco DARK ESCAPE 4D, Operation Manual

Page: 84 / 209

82
8A. Installation and Assembly
- Must be performed by a technician -
Insert the tabs of the signboard box assembly into the insertion slots on top of the roof reinforcement
and the rear top bar. ( )
Connect the connector. ( )
Rotate the signboard box assembly toward you so that it is right side up ( ), slide it toward the back
to align the position ( ), and secure it with two flat washers (ø5.5 x 20 x t1.0) and four Torx bolts (M5
x 16). ( )
Insertion slot
Tab
[L side]
Insertion slot
Connector
Roof reinforcement
Signboard box assembly
Tab
Rear top bar
[L side]
Torx bolt
(M5 x 16)
Torx bolt (M5 x 16)
Flat washer
(ø5.5 x 20 x t1.0)
Signboard box assembly
Roof reinforcement
Rear top bar
Perform the same procedure to install the R side signboard box assembly.