Bandai Namco DARK ESCAPE 4D, Operation Manual

Page: 117 / 209

115
8B. Service
- Must be performed by a technician -
Service/T
echnician’
s Manual
Test Mode
Troubleshooting
Remove the four Phillips hexagon socket head bolts (with flat and spring washers) (M6 x 16), tilt the
top of the LCD monitor toward you, and then lift up and remove the LCD monitor.
Phillips hexagon socket head bolt (with flat and spring washers) (M6 x 16)
Phillips hexagon socket head bolt (with flat and spring washers) (M6 x 16)
LCD monitor

Place the LCD monitor onto a piece of air bubble wrapping, etc. to avoid scratching it when
performing the work.
Remove the four Phillips pan head screws (with flat and spring washers) (M4 x 10) on each side (total
eight screws), remove the right and left monitor brackets, and replace the LCD monitor.
Monitor bracket
Phillips pan head screw
(with flat and spring washers) (M4 x 10)
Monitor bracket
Air bubble wrap, etc.
LCD monitor
Phillips pan head screw
(with flat and spring
washers) (M4 x 10)
To install, perform the procedure in reverse.