Bandai Namco DARK ESCAPE 4D, Operation Manual

Page: 162 / 209

160
8B. Service
- Must be performed by a technician -
8B-4-6 Wall Assembly
(1) Replacing LED Modules

To avoid electric shock, accidents or injuries to yourself or other people, or damage to the
electronic circuits, be sure to turn off the power switch before starting work.
Turn off the power switch of the machine. (See “8A-8-1 Turning the Power Switch On” on page 95.)
Remove the four Torx bolts (M5 x 8), and remove the LED panel from the roof reinforcement.
Torx bolt (M5 x 8)
Roof reinforcement
LED panel
Remove the two Phillips pan head screws (with flat and spring washers) (M4 x 12), disconnect the
connector, and remove the LED tube.
Connector
LED tube
Phillips pan head screw (with flat and spring
washers) (M4 x 12)
Phillips pan head screw (with flat and spring washers)
(M4 x 12)