Bandai Namco DARK ESCAPE 4D, Operation Manual

Page: 165 / 209

163
8B. Service
- Must be performed by a technician -
Service/T
echnician’
s Manual
Test Mode
Troubleshooting
Open the cord clip, and pull the monitor adjustment switches around the outside of the front assembly
to a position from where the monitor screen can be seen.
Monitor adjustment switch
LCD monitor
Turn on the power switch and adjust the LCD monitor. (See “8B-5-2 LCD Monitor Picture Quality
Adjustment” on page 164 and “8B-5-3 LCD Monitor Settings” on page 165.)
(a) (b) (c) (d) (e) (f)
OSD key Function
(a) AUTO/ESC button Returns to the previous item.
(b) DOWN button Selects the next lower item or increases the value.
(c) UP/SOURCE button When pressed during OSD screen display, this selects the next upper item or
decreases the value. (When pressed other than during OSD screen display,
this selects the input source. Normally this button is not used.)
(e) MENU button Displays the menu and enters the selected item or setting.
(e) LED lamp Green: Power ON
Red: Power ON (no signal)
Off: Power OFF
(f) POWER button Turns the monitor on and off. (Normally this button is not used.)
After finishing the adjustments, turn off the power switch and install the monitor adjustment switches
by reversing the procedure in steps to .