139
8B. Service
- Must be performed by a technician -
Service/T
echnician’
s Manual
Test Mode
Troubleshooting
Disconnect the three connectors, remove the four Phillips pan head screws (with flat and spring
washers) (M3 x 10), and remove and replace the switching regulator (12V).
Switching regulator
Switching regulator
Connector
Connector
Phillips pan head screw (with flat and spring washers) (M3 x 10)
Phillips pan head screw
(with flat and spring
washers) (M3 x 10)
To install, perform the procedure in reverse.
When installing, lock the connectors securely.
When installing, be careful not to pinch the connectors and harness.
When removing, be careful not to damage the PC boards or other parts.
Summary of Contents for DARK ESCAPE 4D
