118
8B. Service
- Must be performed by a technician -
(2) Replacing the GUN DRIVE PC Board
To avoid electric shock, accidents or injuries to yourself or other people, or damage to the
electronic circuits, be sure to turn off the power switch before starting work.
PC boards are sensitive to static electricity. If a person handles a PC board while charged with static
electricity, the parts on the PC board may be damaged. Before handling a PC board, discharge the
static electricity from your body; for example, by touching the surface of grounded metal.
Turn off the power switch of the machine. (See “8A-8-1 Turning the Power Switch On” on page 95.)
Remove the service panel L on the L side of the center assembly. (See step
of “8A-4-1 Connecting
the Front Assembly and Center Assembly” on page 68.)
Remove the USIO PCB base. (See step
of “8B-4-2(1) Replacing the USIO (T) PC Board” on page
116)
Remove the four Phillips pan head screws (with flat and spring washers) (M3 x 10), and remove and
replace the GUN DRIVE PC board.
Phillips pan head screw (with flat and spring washers) (M3 x 10)
GUN DRIVE PC board
To install, perform the procedure in reverse.
Summary of Contents for DARK ESCAPE 4D
