154
8B. Service
- Must be performed by a technician -
Replacing the LED module at the front of the top cover center
To avoid electric shock, accidents or injuries to yourself or other people, or damage to the
electronic circuits, be sure to turn off the power switch before starting work.
The work is performed while standing in a high location. Use a stool or ladder. Working in an
unnatural body posture may result in injury or machine damage.
Turn off the power switch of the machine. (See “8A-8-1 Turning the Power Switch On” on page 95.)
Remove the two flat washers (ø4.5 x 15 x t1.6) and two Phillips pan head screws (with flat and spring
washers) (M4 x 20), and remove the top LED cover plate.
Flat washer (ø4.5 x 15 x t1.6)
LED cover plate
Phillips pan head screw (with flat and spring washers) (M4 x 20)
Remove the two Phillips pan head screws (with flat and spring washers) (M4 x 10), disconnect the
connector, and remove the LED tube.
Phillips pan head screw (with flat and spring washers) (M4 x 10)
LED tube
Connector
LED tube Cap L
LED tube Cap U
Summary of Contents for DARK ESCAPE 4D
