86
8A. Installation and Assembly
- Must be performed by a technician -
Insert the top cover center as shown in the figure, and secure the lower part to the top cover supports
(L) and (R) with two flat washers (ø5.5 x 20 x t1.0) and two Torx bolts (M5 x 16).
Flat washer (ø5.5 x 20 x t1.0)
Flat washer (ø5.5 x 20 x t1.0)
Torx bolt (M5 x 16)
Torx bolt (M5 x 16)
Top cover center
Top cover support (R)
Top cover support (L)
Well nut
Insert the top cover side (L) onto the L side of the rear assembly top surface from the front, and secure
it with four flat washers (ø5.5 x 20 x t1.0) and four Torx bolts (M5 x 16). At this time, the upper part of
the top cover center is also secured. Next, secure the bottom of the top cover side (L) with two Torx
bolts (M5 x 8). Perform the same procedure to install the top cover side (R) to the R side.
Torx bolt (M5 x 16)
Torx bolt (M5 x 16)
Torx bolt (M5 x 16)
Torx bolt (M5 x 16)
Torx bolt (M5 x 16)
Torx bolt (M5 x 8)
Flat washer (ø5.5 x 20 x t1.0)
Flat washer (ø5.5 x 20 x t1.0)
Flat washer (ø5.5 x 20 x t1.0)
Flat washer (ø5.5 x 20 x t1.0)
Flat washer
(ø5.5 x 20 x t1.0)
Top cover side (R)
Top cover center
Rear assembly
Top cover side (L)
Summary of Contents for DARK ESCAPE 4D
