52
7. Operation
(e) LED TEST
This screen is used to test the LED lighting.
In the I/O TEST Screen on page 45, select LED TEST and press the Enter button. The LED TEST
screen appears.
LED TEST
[ON:RED]
SELECT SW:CHOOSE ENTER SW:ENTER
ALL
OFF
1P START
OFF
2P START
OFF
2D/3D SWITCH
ON
CEILING LIGHT
OFF
EXIT
(1)
(2)
(3)
(4)
(5)
LED TEST screen
Item
Description
(1) ALL
When this is set to ON, all LEDs light up.
(2) 1P START
When this is set to ON, the 1P START button LED lights up.
(3) 2P START
When this is set to ON, the 2P START button LED lights up.
(4) 2D/3D SWITCH
When this is set to ON, the 2D/3D switching button LED lights up.
(5) CEILING LIGHT
When this is set to ON, the ceiling light LED inside the cabinet lights up.
Flip the Select switch up or down to select an item, and press the Enter button to switch the corresponding
LED ON and OFF.
The default setting is OFF, indicated in white. When set to ON, the setting is indicated in red.
* Each LED is lit up when ALL is set to ON or the corresponding item is ON.
* (5) CEILING LIGHT only fades on and off over approximately 2 seconds.
Select EXIT and press the Enter button to return to the I/O TEST screen.
Summary of Contents for DARK ESCAPE 4D
