background image

51

Test Mode

Troubleshooting

7.  Operation

Operation

(d)  VITAL SENSOR TEST (Startle Sensor Test)

  In the I/O TEST screen on page 45, select VITAL SENSOR TEST and press the Enter button.

 

The VITAL SENSOR TEST screen appears.

VITAL SENSOR TEST

ENTER SW:EXIT

  

  GRIP GUN TO SENSOR TEST

 

1P GRIP 

ON

 

1P VITAL SENSOR 

123

 

2P GRIP 

OFF

 

2P VITAL SENSOR 

60

(1)
(2)
(3)
(4)

VITAL SENSOR TEST screen

Item

Description

(1) 1P GRIP

ON while the 1P side startle sensor is gripped.

(2) 1P VITAL SENSOR

Heart rate value measured by the 1P side startle sensor *

(3) 2P GRIP

ON while the 2P side startle sensor is gripped.

(4) 2P VITAL SENSOR

Heart rate value measured by the 2P side startle sensor *

*  Grip the gun grips correctly with both hands. After a short while, your heart rate will be displayed.  

“0” is displayed when the gun grips are released, and “255” is displayed when the gun grips are gripped but a stable heart 

rate value cannot be obtained.

* This product is not a health device.

  Hold the gun controller grips with your bare hands, and check each item.
  Press the Enter button to return to the I/O TEST screen.

Summary of Contents for DARK ESCAPE 4D


















































































































































































































Reviews: