Bandai Namco DARK ESCAPE 4D, Operation Manual

Page: 109 / 209

107
8B. Service
- Must be performed by a technician -
Service/T
echnician’
s Manual
Test Mode
Troubleshooting
Select the switching regulator to be replaced, disconnect the two or three connectors from the regulator
base, remove the four or five cap screws (M) (M3 x 6), and remove and replace the switching regulator.
Cap screw (M)
(M3 x 6)
Cap screw (M)
(M3 x 6)
Cap screw (M) (M3 x 6)
Cap screw (M)
(M3 x 6)
Cap screw (M)
(M3 x 6)
Connector
Connector
Connector
Connector
5V
24V
12V
36V
To install, perform the procedure in reverse.

When installing, lock the connectors securely.

When installing, be careful not to pinch the connectors and harness.

When removing, be careful not to damage the PC boards or other parts.