Bandai Namco DARK ESCAPE 4D Operation Manual Download

Page: 122 / 209

120

8B. Service

- Must be performed by a technician -

Replace the illuminated switch or LED lamp, and then install by reversing the procedure.

LED lamp

Illuminated switch

“+” mark



When installing the LED lamp, be careful to insert the LED lamp with the correct orientation.



When connecting the connectors, match the connector colors with the illuminated switch button

colors.



When installing, be careful not to pinch the connectors and harness.



After finishing replacement, be sure to check the illuminated switch and LED lighting operation.

(See “7-7-4(e) LED TEST” on page 52.)

Summary of Contents for DARK ESCAPE 4D


















































































































































































































Search results

Summary of Contents for DARK ESCAPE 4D

Reviews:

Related manuals for DARK ESCAPE 4D

Brands by name

Popular brands

Bandai Namco DARK ESCAPE 4D, Operation Manual

Search results

Summary of Contents for DARK ESCAPE 4D

Reviews:

Related manuals for DARK ESCAPE 4D

Brands by name

Popular brands