32
7. Operation
Should an abnormality occur, turn off the power switch immediately to stop operations. Then,
be sure to disconnect the power cord plug from the outlet. Operating the machine while the
abnormality persists may result in a fire or accident.
Dust accumulating on the power cord plug may result in a fire. Inspect the plug regularly and
remove any dust.
Fully insert the power cord plug into the outlet. Poor contact may generate heat and result in
a fire or burns.
Before operating the machine, be sure to check that installation has been performed according
to the instructions and specified procedures (See “5. Delivery and Installation Conditions” on
page 24.) in this Operation Manual. Failure to install the machine correctly may result in a fire,
electric shock, injury or malfunction.
The warning labels contain important information for ensuring safety. Be sure to observe the
following. (For the warning label locations, see “1-4 Machine Warning Labels” on page 3.)
•
To ensure that the warning labels attached to the machine are always clearly visible, install
the machine in an appropriate location with ample illumination and keep the labels clean
at all times. Make sure that the labels are not hidden by other machines or objects.
•
Do not remove or alter the warning labels.
•
If a warning label becomes excessively dirty or damaged, replace it with a new one. To
order warning labels, contact your distributor.
To ensure safe use of the machine, be sure to perform the pre-operation inspection (See “7-4
Pre-operation Inspection” on page 34.) and service (See “8B. Service” on page 97.) described
in this Operation Manual. Omitting these inspections or service may result in an accident.
7-1 People Who Should Avoid Playing
To ensure the safety of players, be careful not to let the following types of people play. Otherwise,
this may result in an accident.
•
People who are sensitive to light stimulation
•
People who disregard the warning labels attached to the machine
Summary of Contents for DARK ESCAPE 4D
