Bandai Namco DARK ESCAPE 4D, Operation Manual

Page: 123 / 209

121
8B. Service
- Must be performed by a technician -
Service/T
echnician’
s Manual
Test Mode
Troubleshooting
8B-4-3 Gun Assembly
The description below explains how to remove and install the L side. Perform the same procedure to remove
and install the R side.
(1) Removing and Installing the Gun Assembly

To avoid electric shock, accidents or injuries to yourself or other people, or damage to the
electronic circuits, be sure to turn off the power switch before starting work.
Turn off the power switch of the machine. (See “8A-8-1 Turning the Power Switch On” on page 95.)
Remove the four button head bolts (M6 x 30) from the top of the center assembly, remove the four flat
washers (ø6.5 x 22 x t1.6) and four button head bolts (M6 x 30) from the front of the center assembly,
and then pull the gun assembly upward.
Disconnect the connector on the bottom of the gun assembly, and remove and replace the gun assembly.
Gun assembly
Gun assembly
Button head bolt (M6 x 30)
Button head bolt (M6 x 30)
Button head bolt (M6 x 30)
Flat washer (ø6.5 x 22 x t1.6)
Center assembly
Connector
To install, perform the procedure in reverse.