Baker Hughes Panametrics PanaFlow LC, User Manual

Page: 76 / 146

4.10 Option I/O errors
Table 27: Option I/O errors description
Error Code Error Message Description
A1:AnalogCh(S2:3) Error! ADC Channel(S2:3) is not responding
Analog input /RTD input is not working.
If error persists after power cycle,
contact Panametrics factory
A2:AnalogCh (S2:4) Error! ADC Channel(S2:4) is not responding
Analog input /RTD is not working. If error
persists after power cycle, contact
Panametrics factory
A3:AnalogCh (S2:1) Error! DAQ Channel (S2:1) is not responding
Analog output (4-20mA) is not working.
If error persists after power cycle,
contact Panametrics factory
A4:AnalogCh (S2:2) Error! DAQ Channel (S2:2) is not responding
Analog output (4-20mA) is not working.
If error persists after power cycle,
contact Panametrics factory
A6:(S2:3)Ch Not Calibrated
Error occurs when Analog Input/
RTD(S2:3) are not calibrated
Calibrate the Analog Input/RTD input. If
error persists after calibration, contact
Panametrics factory
A7:(S2:4)Ch Not Calibrated
Error occurs when Analog Input/RTD
(S2:4) are not calibrated
Calibrate the Analog Input/RTD input. If
error persists after calibration, contact
Panametrics factory
A10:(S2:3)Input NotConnect!
Analog Input: Error occurs when
(4-20mA) input is not connected at
Channel (S2:3).
RTD Input: Error occurs when RTD input
is not connected or temp greater than
390 deg C at Channel (S2:3)
Check connectivity for Analog Input/
RTD input and RTD temperature.
Try power cycling the meter. If error
persists after power cycle, contact
Panametrics factory
A11:(S2:4)Input NotConnect!
Analog Input: Error occurs when
(4-20mA) input is not connected at
Channel (S2:4).
RTD Input: Error occurs when RTD input
is not connected or temp greater than
390 deg C at Channel (S2:4)
Check connectivity for Analog Input/
RTD input and RTD temperature.
Try power cycling the meter. If error
persists after power cycle, contact
Panametrics factory
A12:(S2:3)Ch OverRange Err!
Exceeds input values. For analog input
(S2:3) greater than 21mA
Ensure analog input current less than
21mA. Try power cycling the meter.
If error persists after power cycle,
contact Panametrics factory
A13:(S2:4)Ch OverRange Err! Analog input(S2:4) greater than 21mA
Ensure analog input current less than
21mA. Try power cycling the meter.
If error persists after power cycle,
contact Panametrics factory
64