Baker Hughes Panametrics PanaFlow LC, User Manual

Page: 130 / 146

H.7 Configurable measurements
Below table shows the measurements available over FF:
Table 39: Measurements available over FF
Velocity Ch 1 Signal Quality Down Ch 2 SNR Down
Volumetric Ch 1 Amplitude Up Ch 2 Peak Index Up
Mass Flow Ch 1 Amplitude Down Ch 2 Peak Index Down
Batch Fwd Volumetric Totals Ch 1 Gain Up Ch 2 Peak % Up
Batch Rev Volumetric Totals Ch 1 Gain Down Ch 2 Peak % Down
Totalizer Elapsed Time Ch 1 SNR Up Ch 2 No. Of Errors
Soundspeed Ch 1 SNR Down Ch 3 Soundspeed
Inventory Fwd Volumetric Totals Ch 1 Peak Index Up Ch 3 Transit Time Up
Inventory Rev Volumetric Totals Ch 1 Peak Index Down Ch 3 Transit Time Down
Inventory Totalizer Elapsed Time Ch 1 Peak % Up Ch 3 DeltaT
Meter Factor Ch 1 Peak % Down Ch 3 Signal Quality Up
Reynolds K-Factor Ch 1 No. Of Errors Ch 3 Signal Quality Down
Current Operating Temperature Ch 2 Soundspeed Ch 3 Amplitude Up
Standard Volumetric Ch 2 Transit Time Up Ch 3 Amplitude Down
Batch Net Volumetric Totals Ch 2 Transit Time Down Ch 3 Gain Up
Error Status Ch 2 DeltaT Ch 3 Gain Down
Health Code (All System Errors bit
map)
Ch 2 Signal Quality Up Ch 3 SNR Up
Reported Error (highest priority Error) Ch 2 Signal Quality Down Ch 3 SNR Down
Gate State Ch 2 Amplitude Up Ch 3 Peak Index Up
Ch 1 Soundspeed Ch 2 Amplitude Down Ch 3 Peak Index Down
Ch 1 Transit Time Up Ch 2 Gain Up Ch 3 Peak % Up
Ch 1 Transit Time Down Ch 2 Gain Down Ch 3 Peak % Down
Ch 1 DeltaT Ch 2 SNR Up Ch 3 No. Of Errors
Ch 1 Signal Quality Up
Meter Information
System Serial number Sensor 2 Up Serial number Buffer 1 Dn Serial number
Flow board Serial number Sensor 2 Dn Serial number Buffer 2 Up Serial number
Flow board hardware revision Sensor 3 Up Serial number Buffer 2 Dn Serial number
Sensor 1 Up Serial number Sensor 3 Dn Serial number Buffer 3 Up Serial number
Sensor 1 Dn Serial number Buffer 1 Up Serial number Buffer 3 Dn Serial number
118