Baker Hughes Panametrics PanaFlow LC, User Manual

Page: 32 / 146

3.2 Passcodes
IMPORTANT:
Not all users will have access to all of the menus. Some
menus are restricted to only those users with the proper
passcodes.
The default passcodes for the XMT1000 flow transmitter are:
• Keypad Lockout Password, default (fixed) = 102719 [this
password cannot be changed]
• Operator Password, default (changeable) = 111111
• Software Upgrade Password, System Generated specific
for the System Serial Number [this password cannot be
changed].
IMPORTANT:
Panametrics recommends changing all default
(changeable) passwords after commissioning the meter.
3.2.1 Unlock from keypad lockout
After power up, if the meter’s Measurement View (Refer
Figure 48) shows a lock icon on the top right of the display,
use the following steps to unlock the meter from keypad
lockout mode.
• Press ESC-ENT-ESC [

√

] followed by either “Operator”
password or the “Keypad Lockout” password. The lock
icon on the top right of the display will show an open
lock indicating the meter keypad is unlocked.
3.3 Measurement view, log-in and
primary pages
3.3.1 Measurement view
On power up, the XMT1000 meter shows the following
screens:
• Panametrics Logo screen
• Meter Initialization screens
• Power-on self-tests and results
• Finally, the Measurement View (Refer Figure 48)
This screen (Refer Figure 48) will be referred to as
“Measurement View” throughout this chapter. User can
choose the measurement to be displayed in this view from
a list of options. The Error indicator at the bottom left of the
display will be blank if the meter has no error.
Velocity
0.000
m/s
E22: SingleChAccuracy
Measurement to display
Lock/Unlock Icon
Value for the selected measurement
Unit for the value displayed
Error Number and Short Error Description
Figure 48: Measurement view
20