Baker Hughes Panametrics PanaFlow LC, User Manual

Page: 118 / 146

H.2.4 FISCO (Fieldbus intrinsically safe concept)
The XMT1000 Fieldbus is certified as a FISCO connection for
both entity and FISCO parameters:
•
FISCO Parameters
V
max
or U
i
= 17.5 V
I
max
or L
i
= 380 mA
C
i
= 0
L
i
= 10 µH
P
i
= 5.32 W
• Entity Parameters
V
max
or U
i
= 24 V
I
max
or L
i
= 250 mA
C
i
= 0
L
i
= 10 µH
P
i
= 5.32 W
Note: The XMT1000 FISCO control drawing is Panametrics
drawing #752-584. Please consult the factory for a copy of
the drawing.
Attention!
The FISCO cover must be installed to comply
with FISCO guidelines.
IMPORTANT:
The FISCO cover on the XMT1000 terminal PCB is required to
provide a barrier between IS and non-IS connections. This
cover must be installed if the Fieldbus application is FISCO.
The FISCO cover should come installed from the factory, as
shown in Figure 128 below. The Fieldbus cables should be
installed through the XMT1000 upper right port for direct
entry into the FISCO zone on the terminal PCB.
Cable Port
(p/n 412-2884)
Mounting Screw
Cover (p/n 421-4378)
Figure 128: Installed FISCO cover and mounting screw
H.2.5 DD File
The DD file can be found on the Foundation Fieldbus website
www.fieldbus.org under Panametrics as manufacturer and
XMT1000 as model. It may also be found on the DCS vendor
website if available.
106