Baker Hughes Panametrics PanaFlow LC, User Manual

Page: 120 / 146

H.3.3 Communication
Stack Manufacturer: Softing AG
Backup LAS Capable: Yes*
Total Number of VCRs: 24
Fixed VCRs for Configuration: 1
*LAS means Link Active Scheduler. It can schedule a network
if the main LAS fails.
H.3.4 User layer
FB Application Manufacturer: Softing AG
Function Blocks: 5-AI(e), 1-PID
Supports Block Instantiation: No
Firmware Upgrade over Fieldbus: No
Configuration Write Protect: HW Jumper on PCB
H.3.5 Function blocks
Resource Block Class Type: Enhanced (Field Diagnostics)
Transducer Blocks: XMIT, COMPOSIT CH, CH 1, CH 2, CH 3
Transducer Block Class Type: Custom
Function Blocks: AI (5), PID
FB Execution Time (ms): 20, 40
Function Block Class Type: Standard
Figure 130: XMT1000 FF blocks
H.4 Resource Block
The Resource Block provides common information about the
XMT1000 Foundation Fieldbus implementation. The user can
find FF revision numbers, set passwords and configure the
NAMUR NE107 bit map.
H.4.1 FF Revision
Figure 131 below shows the Foundation Fieldbus SW and HW
versions in the XMT1000 Resource Block, and includes an FF
Revision for both.
Figure 131: FF Revision in XMT1000 resource block
H.4.2 Password
A password must be entered to change XMT1000 system
parameters. This can be done using Foundation Fieldbus.
There are different levels of security for different Passwords
(Admin or Operator). Please see the standard manual for
more detail on password levels. Figure 132 below shows the
password fields in the XMT1000 Resource Block.
Figure 132: Password Fields in XMT1000 resource block
108