Manual Weighing Controller A 810
A.S.T. Angewandte SYSTEM-TECHNIK GmbH Dresden
Page
65
I n P U T
3.1.16.5. Set to default “dEF”
Toggled decision to set all parameters
of the “Input” sub menu to the default
values when ON.
Input signal D18 dominates D19.
When D18 keeps “Low” (“Neg” = OFF) then D19 will be ignored.
When D19 kepps “Low” (“Neg” = OFF) then with falling edge of D18 user function of D18 will be executed
and with re-set (rising edge) of D18 user function of D19 will be executed.
Thus a single user function can be executed by falling and rising edge of a input D18, when both signal
have the same user function associated.
d E F
o F F
o n
/NET
GROSS
0
TARE
ENT
TARE
Summary of Contents for a810
Page 2: ......
