AST a810, Manual

Page: 91 / 116

Manual Weighing Controller A 810
A.S.T. Angewandte SYSTEM-TECHNIK GmbH Dresden
Page
89
4.7. Tables of serial interfaces
4.7.1. Commands of the PC Interface
Name Code
decimal Code
hexa Function page
KEYS_ON 32 20 A810 keyboard on 78
KEYS_OFF 33 21 A810 keyboard off 78
KEYFUNCT 36 24 release A810 key function 78
S_D_STI 37 25 transmit display content after dwell 79
S_D_NSTI 38 26 transmit display content even when not at dwell 79
S_D_CONT 39 27 continuous transmission of display content on 79
S_D_CEND 40 28 continuous transmission of display content off 79
S_ALL 41 29 transmit gross, net, and tare 80
ZOOM 42 2A zoom for exchange of data on/off 80
SET_TARA 43 2B set tare memory 80
E_PARAM 44 2C receive filter coefficient, zero tracing, dwell range 80
S_PARAM 45 2D transmit resolution, count-by step, filter
coefficient, zero tracing, dwell range 81
E_TIME 46 2E receive time 82
E_DATE 47 2F receive date 82
E_BEIW 48 30 receive coefficient 82
E_LFDNR 49 31 receive serial number 82
S_LFDNR 50 32 transmit serial number 82
E_DBILD 51 33 receive print image 82
TERMINAL 52 34 Terminal-mode of operation on 85
S_KEYON 53 35 transmit key code on 78
S_KEYOFF 54 36 transmit key code off 78
S_INPUT 55 37 transmit input of numbers 78
PROTOK 56 38 set protocol 84
ADDRESS 57 39 address A810 in TTY-Ring / RS485-BUS 84
LINES 58 3A define line structure 84
DR_PCON 59 3B print output by PC on 83
DR_PCOFF 60 3C print output by PC off 83
S_CONFIG 65 41 transmit configuration of device 85
E_DBOFFS 66 42 receive print image offset values 83
PRINT 67 43 direct print 83
E_ME 69 45 set unit of measurement 81
CALL_FU 71 47 call a operating function 85
E_DAC0 78 4E set 12-Bit value at DA-converter 86
E_PCODE 82 52 set product code 84
S_PCODE 83 53 receive product code 84
Table 3