Aritech 1X-E4 Series, Installation Manual

Page: 8 / 100

Chapter 1: Introduction
2 1X-E4 Series Installation Manual
Product range
Panels in the 1X-E4 Series are conventional fire and evacuation control panels.
The series includes the models shown below.
Model Description
1X-E4 Four-zone conventional fire alarm and evacuation control panel, supporting four
evacuation areas without alarm counter
1X-E4-NL Four-zone conventional fire alarm and evacuation control panel, supporting four
evacuation areas with alarm counter
All models have been designed in accordance with EN 54-2, EN 54-4, and
NEN 2575 standards. For further details, see Appendix B “Regulatory
information” on page 89.
Product compatibility
Products compatible with these control panels are listed in the product
compatibility list. Only those products specified in the compatibility list are
guaranteed to be compatible.
To download the latest product compatibility list, visit firesecurityproducts.com.
Operating modes
Supported operating modes are shown in the table below. The default operating
mode is NEN 2575 with four evacuation areas.
Table 1: Operating modes
Operating mode
EN 54-13 option
[1]
Region
NEN 2575 4E (default) Available [2] European Union
NEN 2575 2E Available European Union
NEN 2575 1E Available European Union
[1] EN 54-13 supervision requires compatible system wiring and devices and must be enabled by
the installer in the control panel configuration.
[2] Requires a 2010-1-SB expansion board to be installed (not supplied).
Two menu inserts are available to label the panel controls and indicators. In its
default configuration, the panel does not use EN 54-13 zone supervision, and the
corresponding insert has no Fault Output Fault/Disabled LED.
When the panel is configured for EN 54-13 zone supervision, the corresponding
insert shows a Fault Output Fault/Disabled LED for use in the fault warning
output supervision required by EN 54-13.