MP03700EN_181101
MAINTENANCE AND INSPECTION
Maintenance and inspection machine
should only be carried out by a
qualified technician.
Ask you dealer or a qualified electrician
to carry out any maintenance and
inspection of the electrical system.
Turn off the power switch and
disconnect the power cord from the
wall outlet at the following thime.
Otherwise the machine may operate if the
treadle is pressed by mistake, which could result
in injury. However. The motor will keep turning
even after the power is switched off as a result
of the motor s inertia. Wait until the motor stops
fully before staring work.
When carrying out inspection adjust
maintenance.
When replacing consumable par
rotary hook.
Warning labels:
The following warning labels appear on the sewing machine
Please follow the instructions on the labels at all times when using the machine. If the labels have
been removed or are difficult to read please contact you
1.
Moving parts may cause injury Operate with safety devices
Turn off main switch be
2.
Be sure to connect the ground. If the ground connection is not secure you
run the risk
3.
Direction of operation
MAINTENANCE AND INSPECTION
Maintenance and inspection machine
should only be carried out by a
Ask you dealer or a qualified electrician
carry out any maintenance and
the electrical system.
off the power switch and
the power cord from the
following thime.
operate if the
which could result
motor will keep turning
is switched off as a result
Wait until the motor stops
adjustment and
rts such as the
If the power switch need to be
when carrying out some adjustment,
extremely care full to observe all safety
precautions.
When checking the rotary hook
lubrication, do not touch
such as the rotary hook,
needle bar with your finger or paper nor push
them with other objects. Otherwise
damage to the machine may result.
Use only the proper replacement pads
as specified by our company.
If any safety devices have been
removed. be absolutely sure to re
them to their original positions and
check that they operate Correctly before using
the machine
Any problems in machine operation
which result from unauthorized
modifications to the
covered by the warranty
appear on the sewing machine
Please follow the instructions on the labels at all times when using the machine. If the labels have
been removed or are difficult to read please contact your nearest dealer
CAUTION
Moving parts may cause injury Operate with safety devices
Turn off main switch before threading, changing bobbin and needle, cleaning etc.
Be sure to connect the ground. If the ground connection is not secure you
run the risk of receiving a serious electric shock.
Direction of operation
© ANITA
6
If the power switch need to be left on
carrying out some adjustment, be
care full to observe all safety
When checking the rotary hook
touch moving pads
hook, needle and
or paper nor push
Otherwise injury or
may result.
Use only the proper replacement pads
specified by our company.
If any safety devices have been
be absolutely sure to re-install
original positions and
Correctly before using
Any problems in machine operation
result from unauthorized
machine will not be
covered by the warranty
Please follow the instructions on the labels at all times when using the machine. If the labels have
fore threading, changing bobbin and needle, cleaning etc.
Be sure to connect the ground. If the ground connection is not secure you
www.garudan.cz