© ANITA
MP03700EN_181101
47
7. Adjust the needle bar lift amount.
1) Set the stitch length to eight 2
(approx. 2 mm) or 3 (approx3ram) on the
scale, depending on the model and
specifications of the machine.
(Refer to the table on page 17.)
2) Turn the machine pulley to move the
needle
ⓑ
or to its lowest position and
adjust so that reference line b is aligned
as shown in the illustration.
Check that the rotary hook tip
④
is
aligned with the center of the needle and
that the distance from the upper edge of
the needle hole to the rotary hook up
④
is 1-1.5mm at this time.
(Refer to pages 33 and 34 for the
adjustment procedures.)
8. Return the head to its original
position.
9. Attach the needle plate.
10. Attach the presser foot.
www.garudan.cz