© ANITA
MP03700EN_181101
36
Checking the lubrication amount:
After turning the lubrication adjustment
screw to adjust the lubrication amount
operate the machine for 5-10 minutes
before checking the lubrication amount.
1. Remove the needle.
2. Remove the bobbin or the cap.
3. Turn on the power.
4. Insert a piece of white paper into the
left side of the rotary hook (into the right
side for the right rotary hook) and
depress the treadle fully to operate the
machine at maximum speed for
approximately 10 seconds.
5. Stop the machine and check the
amount of oil shown is scattered on the
paper. (The adjustment is good if the
amount of oil shown at left is scattered
during approximately 10 seconds.)
www.garudan.cz