© ANITA
MP03700EN_181101
13
6) Turn the screw
⑩
until the distance between the
end of the screw
⑩
and the knee lifter
⑦
is
approximately 8mm.
7) Turn the screw
⑩
to adjust so that the presser foot
⑤
is at the desired position within a distance of 13mm
of the needle plate when the knee lifter
⑨
plate is fully
pressed.
8) After adjustment is completes, securely tighten the
nut
⑨
.
Installation:
1.
Control box
1) Control box
2) Bolts (5pcs)
3) Spring washers (5pcs)
4) Washer (5 purchase)
2.
Connecting rod
5) Nut
6) Connecting rod
3.
Power switch
1) Power switch
2) Screw (2pcs)
www.garudan.cz