© ANITA
MP03700EN_181101
18
Winding the lower thread:
1. Turn on the power switch.
2. Place the bobbin
①
into the bobbin winder
shaft
②
.
3. Wind the thread several times around the
bobbin
①
in the direction indicated by the arrow.
4. Push down the bobbin presser arm
③
.
5. Raise the presser foot with presser lifter.
6. Depress the treadle. Lower thread winding will
then start.
7. Once winding of the lower thread is completed,
the bobbin presser arm
③
will return
automatically.
* If the thread cannot be wound on evenly, loosen
the screw
④
and move the bobbin winder guide
⑤
to the side where there is less thread.
* Turn the adjustment screw
⑥
to adjust the
bobbin winding amount.
- To increase the winding amount: Tighten the
screw.
- To decrease the winding amount: Loosen the
screw.
Note: The amount of thread wound onto the
bobbin should be a maximum of 80% of the
bobbin capacity.
www.garudan.cz