MP03700EN_181101
that the clearance between the rotary hook
pulled as far as it will go in the direction of the arrow.
12. Tighten the set screw
⑮
.
13. Install the slide plates
②
.
14. Add 1-2 drops of oil to the left and right rotary hook races
15. Adjust the rotary hook lubrication amount whil
4. Return the machine head to its original
position.
5. Install the opener
⑦
.
6. Install the feed dog
⑥
7. Install the needle plate
8. Install the presser foot
9. Loosen the set screws
rotary hook
⑩
up and down to adjust so
that the clearance between
⑩
and the needle plate
NOTE Do not turn the rotary hook while the
set screws
⑨
are loosened, otherwise
change the timing between the needle and
the rotary hook.
10. Tighten the set screws
11. Loosen the set screws
opener
⑦
to the left or right to adjust 50
between the rotary hook
⑩
and the opener
⑦
is 0.2mm whe
in the direction of the arrow.
2 drops of oil to the left and right rotary hook races
⑯
.
ubrication amount while referring to page 34
.
© ANITA
50
4. Return the machine head to its original
⑥
.
7. Install the needle plate
⑤
.
he presser foot
④
.
⑨
and move the
up and down to adjust so
that the clearance between the rotary hook
⑤
is 1.3mm.
NOTE Do not turn the rotary hook while the
are loosened, otherwise it will
change the timing between the needle and
10. Tighten the set screws
⑨
.
11. Loosen the set screws
⑮
and move the
to the left or right to adjust 50
is 0.2mm when the opener
⑦
is
www.garudan.cz