MP03700EN_181101
4. INSTALLATION
Machine installation should only be
carried out by a qualified technician.
Contact your dealer or a qualified
electrician for any electrical work
that may need to be done.
The sewing machine weighs
approximately 55kg. The installation
should be carried out two or more
people.
About the machine set-up location:
* Do not set up this sewing machine near other equipment such
as televisions, radios or cordles
equipment may be affected by electronic interference from the
sewing machine.
* The sewing machine should be plugged directly into an AC
wall outlet. Operation problems may result if extension cords
are used.
Carrying the machine:
* The machine should be carried by the arm by two
people as shown in the illustration.
* Hold the motor cover(A)by hand also so that the
pulley does not rotate.
Tilting back the machine head:
* Hold section (B) with your foot so that the
does not move, and then push the arm with both
hands to tilt back the machine head.
CAUTION
tallation should only be
carried out by a qualified technician.
Contact your dealer or a qualified
electrician for any electrical work
done.
The sewing machine weighs
approximately 55kg. The installation
should be carried out two or more
Do not connect the power cord until
installation is complete. The machine
may operate if the treadle
by mistake, which could in injury.
Use both hands to hold the machine
head when tilting it back or returning
it to its original position. If only one
hand is used, the weight
machine head may cause your hand
to slip, and your hand may get
caught.
up location:
* Do not set up this sewing machine near other equipment such
as televisions, radios or cordless telephones, otherwise such
equipment may be affected by electronic interference from the
* The sewing machine should be plugged directly into an AC
wall outlet. Operation problems may result if extension cords
* The machine should be carried by the arm by two
shown in the illustration.
* Hold the motor cover(A)by hand also so that the
Tilting back the machine head:
* Hold section (B) with your foot so that the table
does not move, and then push the arm with both
hands to tilt back the machine head.
© ANITA
10
Do not connect the power cord until
installation is complete. The machine
may operate if the treadle is depressed
h could in injury.
Use both hands to hold the machine
head when tilting it back or returning
it to its original position. If only one
hand is used, the weight of the
machine head may cause your hand
to slip, and your hand may get
www.garudan.cz