© ANITA
MP03700EN_181101
21
Adjusting the stitch length:
GF-2207-147, GF-2207-447
GF-2210-147, GF-2210-447
Turn the stitch length dial clockwise or counter
clockwise that the desired stitch length is at the
uppermost position on the dial.
The larger the number, the longer the
stitch longer will be.
Corner sewing method:
NOTE:
If using this machine in place of a single-needle machine, remove the needle which is not
being used. In such cases, do not use the procedures given below to stop the unused needle bar
from moving, otherwise damage to the machine may result.
To stop needle bars (right and left)
Operate the stop lever after the needle has penetrated the material and has moving.
Do not sew at speeds of over 1000 spm while one of the needle bars been stopped.
To stop operation of the left needle bar: Move the stop lever
①
to the
“
L“ position.
www.garudan.cz