© ANITA
MP03700EN_181101
26
8. CLEANING
The following cleaning operations should be carried out each day in order to maintain the
performance of this machine and to ensure a long service life. Furthermore, if the sewing machine
has not been used for along period of time, carry out the following clearing procedures before using
it again.
Cleaning the rotary hook
1. Turn the machine pulley to raise the needle to its highest position.
2. Open the left and slide plates.
3. Remove the bobbin or the cap.
4. Remove all thread scraps from inside the rotary hook.
5. Replace the bobbin or the cap.
Lubrication:
Lubrication the sewing machine according to the procedure on
page
.
1. Check that the upper threads have been
threaded correctly. (Refer to
page
)
2. Check that the end of the needle is not
broken.
* If the end of the needle is broken, the
needle should be replaced.
3. Lower the finger guard
④
.
4. Carry out a lest sewing.
www.garudan.cz